Sale
SALE
24V
SALE
MEAN WELL ELG 200 16A 12V with 3 pin plug (DALI)
$69.64 Excl. GST
SA RGB End Cap With Hole Straight (5 PACK)
$4.17 Excl. GST
SA RGB LED Neon Flex 24V RGB IP67 (17.3W/M)
Click here to check all stock
| Item Code | Price | Stock |
| SA 36105-3 | $ 78.02 | 17 |
| SA 36105-5 | $ 127.69 | 18 |
| SA 36105-10 | $ 246.37 | 17 |
$78.02 – $246.37 Excl. GST
DOWNLOADS
Check out the latest product specifications and guides.
Product Specification
Installation Guide
IES File
Power Calculator
Power Calculator
Easy to estimate your power supply needs.
Our power calculator helps you determine the power supply needed for your LED light projects.
*Simply answer the questions below, and you'll receive a quick recommendation.
Use one power supplier per single piece of neon flex over 20M.
Enter the required number of the LEDs or Metre
METREWhere will the power supplies be installed?
e.g) Strip or Neon Flex : 8 Metres
Must Have Items (Accessories)
ITEM CODE:
SA 954
ITEM CODE:
SA 955
ITEM CODE:
SA 9422
ITEM CODE:
SA 947
ITEM CODE:
SA 135
ITEM CODE:
SA 9592
ITEM CODE:
SA 9591
ITEM CODE:
SA 9142
ITEM CODE:
SA 95A5
ITEM CODE:
SA 95C1
ITEM CODE:
SA 926-J
2 WAGO Connectors 1 Jar (100 connectors)
554 in stock
| Box -100 Connectors | $0.32 / each |
$32.01 Excl. GST
Key Features & Benefits
- Item Code: SA 36105
- IP67 rated
- Full-Colour range with RGB controller
- Flexible PCB with SMD LED technology
- 24V DC low voltage, safe and reliable
- Cutting mark by every 55.6mm
- The dimming function works only
with HLG Dimmable power supplies. - We strongly recommend both ends power
inputs at all length - 5Years Warranty
Dimension
Additional information
| Weight | N/A |
|---|---|
| Dimensions | 10 × 17 mm |
| POWER |
17.3W |
| VOLTAGE |
DC 24V |
| CURRENT(A) |
0.72 |
| LUMINOUS FLUX |
134lm |
| EFFICIENCY |
7.9lm/W |
| COLOUR |
RGB |
| CRI |
80 |
| VIEWING ANGLE |
120º STANDARD |
| IP RATING |
IP 67 |
| CUTTABLE |
55.6mm |
| DIMMABLE |
Dimmable with HLG Power Only |
| LENGTH |
3M, 5M, 10M |
| WARRANTY |
5 YEAR |
Description
 |
Special Note ROLL LENGTHS_Any claim for short supply will only be considered while |
*Note that should be cut and reconnected with end connectors for installation to avoid defects due to moisture penetration. Please follow the steps below
Installation steps
 |
 |
 |
 |
| Cut the neon flex | Weld the wire to the PCB board | First, put silicone glue inside of the plug, and quick connector then push into the neon flex |
Wipe off the excess glue and wait for the glue to solidify. |
Available Colour
Compatible with RGB Controller
Important Note
|
Installation Precautions 1. All installation and connection must be conducted by qualified electrician. 2. A 24V DC class 2 power supply unit must be used with this LED NEON FLEX. 3. Disconnect the mains power before installing or servicing to avoid electrocution. 4. For a wet location installation you must seal all possible water entry points including covers with clear silicone. |
Dimensions(mm)
Sign in
No account yet?
Create an Account