Sale
SALE
OUT OF STOCK
16W
24V
3000K
Out of stock
LED Wire 22AWG for RGB (50M/Roll)
$59.00 Excl. GST
SA NCR19 360° NEON FLEX 16W 24V Green IP65 (10 Metre / Unit)
$298.97 Excl. GST
SA NCR19 360° NEON FLEX 16W 24V 3000K IP65 (10 Metre / Unit)
$298.97 Excl. GST
DOWNLOADS
Check out the latest product specifications and guides.
Product Specification
Installation Guide
IES File
Power Calculator
Power Calculator
Easy to estimate your power supply needs.
Our power calculator helps you determine the power supply needed for your LED light projects.
*Simply answer the questions below, and you'll receive a quick recommendation.
Use one power supplier per single piece of neon flex over 20M.
Enter the required number of the LEDs or Metre
METREWhere will the power supplies be installed?
e.g) Strip or Neon Flex : 8 Metres
Must Have Items (Accessories)
ITEM CODE:
SA 914
ITEM CODE:
SA 947
ITEM CODE:
SA 95A2
ITEM CODE:
SA 95A1
ITEM CODE:
SA 95A3
ITEM CODE:
SA 95A4
ITEM CODE:
SA 95A5
ITEM CODE:
SA 95A6
ITEM CODE:
SA 926-J
2 WAGO Connectors 1 Jar (100 connectors)
554 in stock
| Box -100 Connectors | $0.32 / each |
$32.01 Excl. GST
Key Features & Benefits
- Item Code: SA 1BJ
- Beam angle 360°uniform light emission in all directions.
- Excellent flexibility for proper bending while easy to be modelling
- 24V DC low voltage, safe and reliable
- IP65 rated
- No Cutting mark (Do not Cut)
- We strongly recommend both ends power
inputs at all length - DALI Compatible
- 5years Warranty
Dimension
Additional information
| Weight | 470 g |
|---|---|
| Dimensions | 10000 × 19 × 19 mm |
| POWER |
16W |
| VOLTAGE |
DC 24V |
| CURRENT(A) |
0.67A |
| LUMINOUS FLUX |
1267lm |
| EFFICIENCY |
79lm/W |
| CCT(K) |
3000K |
| VIEWING ANGLE |
360° |
| IP RATING |
IP 65 |
| DIMMABLE |
DIMMABLE |
| LENGTH |
10M |
| WARRANTY |
5 YEAR |
Description
 |
Special Note ROLL LENGTHS_Any claim for short supply will only be considered while |
| Problems | Reasons | Solutions |
|---|---|---|
| No illumination | No electricity supply | Ensure LED driver is working |
| Automatic power protection from the open or short circuit in output of the power supply | Fix the short circuit problem | |
| Wrong connection of power supply | ||
| Partial illumination | Using a switching mode power supply | Make it as follows: Don’t use switching mode power supplies |
| Wire connection mistake | Check connections | |
| Brightness of LED is inconsistent for inconsistent | Power overloaded | Replace with a power supply that delivers 125% of current required to power the product |
| Voltage drop due to exceeding max-in-series limit | Adhere to the max-in-series limit specified on the product page | |
| LED Flickering | Connection point fault | Fix bad connection point |
| Use a proper LED driver | Replace a new power supply |
Important Note
|
Installation Precautions 1. All installation and connection must be conducted by a qualified electrician. 2. A 24V DC class 2 power supply unit must be used with this LED NEON FLEX. 3. Disconnect the mains’ power before installing or servicing to avoid electrocution. 4. For a wet location installation you must seal all possible water entry points including covers with clear silicone. |
Dimensions(mm)
LED CASES
Sign in
No account yet?
Create an Account