Call us for free now: 07 3219 6711 service@sa-led.com
SKU: SA 10E Categories: , , ,

SA NDR2018 Vertical LED Neon Flex 24V Blue (15.36W/M)


Variation NAME PRICE Stock
[ SA10E-15 ] 15M ($38.27/M) $574.09 0
[ SA10E-30 ] 30M ($33.16/M) $994.69 1

Key Features & Benefits:

Item Code : SA 10E

Unique extrusion process and electronic design can be bended in vertical way

Adopting quality silicone material and one step molding production technique

Special extrusion workmanship, smart in size, good bending performance

Making it easy to cut and join according to different applications.

Cutting mark by every 62.5mm(1.97 inch)
5 Year Warranty
 


Clear selection

Share it:
Power Calculator

(Please enter length you will use at one time.)
METRE Indoor Outdoor

 

 

Special Note

ROLL LENGTHS_Any claim for short supply will only be considered while
the NEON FLEX is in one length, to prove any manufacturing discrepancy.

*Note that once you cut the roll it will void any claim for short supply of the product.

Troubleshooting Common Faults

Problems Reasons Solutions
No illumination No electricity supply Ensure LED driver is working
Automatic power protection from the open or short circuit in output of the power supply Fix the short circuit problem
Wrong connection of power supply
Partial illumination Using a switching mode power supply Make it as follows: Don’t use switching mode power supplies
Wire connection mistake Check connections
Brightness of LED is inconsistent for inconsistent Power overloaded Replace with a power supply that delivers 125% of current required to power the product
Voltage drop due to exceeding max-in-series limit Adhere to the max-in-series limit specified on the product page
LED Flickering Connection point fault Fix bad connection point
Use a proper LED driver Replace a new power supply

*Note that should be cut and reconnected with end connectors for installation to avoid defects due to moisture penetration. The steps velow indicate are possible way of sealing the end:

Installation steps

Cut the neon flex Weld the wire to the PCB board First put silicone glue inside
of the plug, and quick connector
then push into the neon flex
Wipe off the excess glue and
wait for the glue to solidify.

 

 

Cutting Mark By Every 50 mm

 

Important Note

Dimensions(mm)

Weight 900 g
Dimensions 5000 × 11 × 12 mm
MODEL

NDR2018 Vertical LED Neon Flex

POWER

15.36W

LENGTH

[ SA10E-15 ] 15M ($38.27/M), [ SA10E-30 ] 30M ($33.16/M)

CURRENT(A)

0.625A

VOLTAGE

DC 24V

LUMINOUS FLUX

224lm

EFFICIENCY

14lm/W

COLOUR

BLUE

CRI

80

VIEWING ANGLE

156°

IP RATING

IP 68

DIMMABLE

DIMMABLE

CUTTABLE

62.5mm

AVAILABLE LENGTH

15M, 30M

LED SIZE

5050 LED

LED Qty/m

96

WARRANTY

5 YEARS

Reviews


Be the first to review “SA NDR2018 Vertical LED Neon Flex 24V Blue (15.36W/M)”

*

Navigation

MY CART

Close

No products in the cart.

No products in the cart.

WISHLIST

Close

No products were added to the wishlist