SALE
NEW
9.6W
24V
Alternative Products
ITEM CODE:
SA 16084
SA N2-8 PRO LED Neon Flex 24V Blue IP68 (9.6W/M)
In stock
| From | $26.56 / metre |
$271.79 – $796.92 Excl. GST
SA N2-4 PRO LED Neon Flex 24V Blue IP68 (9.6W/M)
Click here to check all stock
| Item Code | Price | Stock |
| SA 1645KP-10 | $ 316.80 | 1 |
| SA 1645KP-20 | $ 607.26 | 1 |
$316.80 – $607.26 Excl. GST
DOWNLOADS
Check out the latest product specifications and guides.
Product Specification
Installation Guide
Important Note
Power Calculator
Power Calculator
Easy to estimate your power supply needs.
Our power calculator helps you determine the power supply needed for your LED light projects.
*Simply answer the questions below, and you'll receive a quick recommendation.
Use one power supplier per single piece of neon flex over 20M.
Enter the required number of the LEDs or Metre
METREWhere will the power supplies be installed?
e.g) Strip or Neon Flex : 8 Metres
Must Have Items (Accessories)
ITEM CODE:
SA 95C1
ITEM CODE:
SA 954
ITEM CODE:
SA 955
ITEM CODE:
SA 957
SA N2-4 LED Neon Flex Clear Mount 12mm ( 20 Pack )
129 in stock
Original price was: $5.24.$4.23Current price is: $4.23. Excl. GST
ITEM CODE:
SA 956
SA N2-4 LED Neon Flex Silicone End Cap (10 Pack)
154 in stock
Original price was: $7.14.$4.81Current price is: $4.81. Excl. GST
ITEM CODE:
SA 926-J
2 WAGO Connectors 1 Jar (100 connectors)
432 in stock
| Box -100 Connectors | $0.32 / each |
$32.01 Excl. GST
ITEM CODE:
SA 947
ITEM CODE:
SA 95A5
ITEM CODE:
SA 914
LED Wire UL 18AWG Red & Black With PVC(50M/Roll)
105 in stock
Original price was: $80.40.$67.00Current price is: $67.00. Excl. GST
Key Features & Benefits
- Item Code: SA 1645KP
- Available in side bending only.
- Built-in wiring—no soldering needed. Just add an end cap for a seamless, continuous light.
- Upgraded, accurate cutting marks are embedded in the neon for easier installation.
- Cutting mark by every 50mm
- IP68 rated
- 5 years Warranty
- The dimming function works only with HLG Dimmable power supplies.
- For outdoor applications, soldering with proper silicone is strongly recommended
- We strongly recommend both ends power inputs at all length
Dimension
Additional information
| Weight | 1700 g |
|---|---|
| Dimensions | 11 × 24 mm |
| POWER |
9.6W |
| VOLTAGE |
DC 24V |
| CURRENT(A) |
0.4A |
| LUMINOUS FLUX |
158lm |
| EFFICIENCY |
15lm/W |
| COLOUR |
BLUE |
| CRI |
80 |
| VIEWING ANGLE |
170° |
| IP RATING |
IP 68 |
| DIMMABLE |
DIMMABLE, Dimmable with HLG Power Only |
| CUTTABLE |
50mm |
| LENGTH |
5M, 10M, 20M |
| WARRANTY |
5 YEAR |
Description
 |
Special Note ROLL LENGTHS_Any claim for short supply will only be considered while |
| Problems | Reasons | Solutions |
|---|---|---|
| No illumination | No electricity supply | Ensure the LED driver is working |
| Automatic power protection from the open or short circuit in the output of the power supply | Fix the short circuit problem | |
| Wrong connection of power supply | ||
| Partial illumination | Using a switching mode power supply | Make it as follows: Don’t use switching mode power supplies |
| Wire connection mistake | Check connections | |
| The brightness of LED is inconsistent for inconsistent | Power overloaded | Replace with a power supply that delivers 125% of the current required to power the product |
| Voltage drop due to exceeding max-in-series limit | Adhere to the max-in-series limit specified on the product page | |
| LED Flickering | Connection point fault | Fix bad connection point |
| Use a proper LED driver | Replace a new power supply |
Important Note
|
Installation Precautions 1. A qualified electrician must conduct all installation and connection. 2. Disconnect the mains power before installing or servicing to avoid electrocution. 3. Ensure the correct drive (12V or 24V) and adequate maximum wattage are used. 4. For a wet location installation you must seal all possible water entry points including covers with clear silicone. |